Worbla - You Choose! 9x10 inch sheet - Cosplay Thermoforming Plastic

Description: Worbla's Finest Art (Original) : Incredibly easy to use with an activation temperature of 90°C, Worbla becomes soft and pliable, allowing you to shape, form and mold the product by hand safely. The adhesive properties mean pieces can be joined without the need for glue, and scraps can be blended for zero waste. These leftovers can be molded to act just like putty, and many artists use Worbla’s Finest Art instead of clay to create near-indestructible pieces. Non-Toxic and Skin-Safe, Worbla’s Finest Art can be used in classrooms, apartments, workshops and beyond without needing uncomfortable safety gear or complicated venting systems. Use hot air such as a heat gun, water or steam to shape the plastic however you want. Worbla BLACK : Incredibly easy to use with an activation temperature of 90°C, Worbla becomes soft and pliable, allowing you to shape, form and mold the product by hand safely. Scraps can be blended for zero waste. These leftovers can be molded to act just like putty, and many artists use Worbla’s Finest Art instead of clay to create near-indestructible pieces. Non-Toxic and Skin-Safe, Worbla can be used in classrooms, apartments, workshops and beyond without needing uncomfortable safety gear or complicated venting systems. Use hot air such as a heat gun, water or steam to shape the plastic however you want. Black Art has a longer working time and a smoother finished surface, compared to Finest Art, and can take and create incredibly small detail. It has slightly less adhesive working time than Finest Art, so joining pieces requires both sides to be close to the 90°C for the best adhesion. Worblas TranspArt (Transparent/Clear) : Unlike regular Worbla, this product should be heated to 120C (250F), so wearing work gloves with rubberized fingers is recommended. The material cools down after a few minutes but can be reactivated as often as you like, so you can work bit by bit. It is recommended to use a wet sponge, old toothbrush, or modeling tools for sculpting. You can also cast this clear material into molds. When kneaded the material becomes a little milky, so you can create semi-opaque effects as well such as LED-backed stones.You can paint Worbla's TranspArt with spray-paint or with a thermal foil used for car detailing. Surplus material should be removed after heating the material again. Rough areas can be smoothed using clear lacquer or nail-polish. To connect pieces or fuse layers, we recommend using clear superglue. It does not adhere to itself in the same way that regular Worbla does. If you have never seen Worbla handled or tried it yourself, customers often compare it to clay, fruit leather or beeswax when heated: becoming pliable and taking detail well, becoming hard and stable when cool. TranspArt is not perfectly clear due to manufacturing but can be heated and stretched to obtain an almost crystal-clear appearance.

Price: 10.99 USD

Location: Oceanside, California

End Time: 2024-11-17T22:44:19.000Z

Shipping Cost: N/A USD