PAS RS 2.2 - Professional Concert System PA Speakers - 3 way

Description: PAS (PROFESSIONAL AUDIO SYSTEMS) RS 2.2 MESSAGE for quantity pricing or with any questions!!!! Freight shipping only! We have been distributing ALL BRANDS of speakers and amplifiers for over 20 years! Higher power components available for additional cost. ALSO available with self powered options! Message for details! Normal 0 false false false EN-US JA X-NONE PAS (PROFESSIONAL AUDIO SYSTEMS) RS 2.2 or RS 1.2 Description: Dual 15" passive, coaxial, full-range loudspeaker system with TOC™ and 2" exit compression driver. Our most popular RS model, the RS-1.2 is recommended where high SPL, more headroom, better intelligibility and greater projection is required in live sound reinforcement applications. Like the RS-1, the RS-2.2 can be run off a single amplifier channel. Features: • Cast frame concentric 15" and 15" bass loudspeaker component with 4" voice coils • 2" exit high frequency Audiophile quality compression driver • Passive dividing network with Time Offset Correction (TOC™) and equalization • Baltic birch enclosure construction • Foam backed steel grille • Recessed handles • Dual /parallel Neutrik NL4 Speakon™ input connectors • Five fly points with hardware • Compact, array-able enclosure design to facilitate installation or set up S-1, The reason the RS-1 has been the most popular installation loudspeaker manufactured by PAS is clear: high definition in a compact package, extended bandwidth and ease of installation. Concentric speaker design, precision crossover filters and dual 15 inch long excursion woofers create a one box extended loudspeaker that is unsurpassed in vocal reinforcement and music playback. The RS-1 features: • Concentric 15” loudspeaker. • Extended high frequency 1” compression driver. • Supplementary 15” woofer for extended low frequencies. • Passive dividing network with Time Offset Correction (TOC™) and equalization. • Baltic birch cabinet construction. • Foam backed steel grille. • Recessed handles. • Fly hardware (anchor plate or optional truss array w/steel reinforcement). • Compact enclosure for ease in installation. RS-1 Specifications: Frequency Response: 40 to 16kHz Power Rating: *600 watts Nominal Impedance: 4 ohm Sensitivity (1w/1m): 99 dB Maximum SPL: 127 dB @1meter (@ rated power) Nominal Coverage Angles: 60ºH x 40º V, above 2 kHz Crossover Frequency: 1.2 kHz L.F. Drivers: CXL-1580C & HL-1580C H.F. Driver: DE 45/8 Input Connectors: 2 x NL4 Dimensions: 35.35” H x 17.25”W x 24”D Weight: 116 lbs Due to limitations of the passive dividing networks the long term average power rating of the concentric section is limited to 200 watts (40 volts into 8 ohms). Since the RS-1 and RS-1.2 have a supplemental 15” driver, their nominal impedance is 4 ohms. The long term average power rating of these cabinets is 400 watts (40 volts into 4 ohms). This in no way affects their transient capabilities. PAS recommends amplifiers that produce at least twice this power (800 watts into 4 ohms) for these cabinets. Since the RS-2.2 does not contain a dividing network, it does not have this limitation. RS-1.2, Since it’s introduction in early 1996, the RS-1.2 has become the most popular system in the TOC™ line. The RS-1.2 uses a 2 inch throat compression driver. The higher sensitivity and greater power handling of this driver results in 9 dB more high frequency headroom than systems with 1 inch drivers. The results are increased clarity, intelligibility and greater throw. A precision passive dividing network and single amplifier connection allows for ease of installation. The RS-1.2 features are similar to the RS-1 with these differences: • Concentric 4” voice coil 15” loud speaker. • Extended high frequency 2” compression driver. • Supplementary 4” voice coil 15” woofer for extended low frequencies. RS-1.2 Specifications: Frequency Response: 40 to 16kHz Power Rating: *800 watts Nominal Impedance: 4 ohm Sensitivity (1w/1m): 100 dB Maximum SPL: 128 dB @1meter (@ rated power) Nominal Coverage Angles: 60º H x 40º V, above 2 kHz Crossover Frequency: 1.2 kHz L.F. Drivers: CXL-2580C & HL-2580C H.F. Driver: DE 750/8 Input Connectors: 2 x NL4 Dimensions: 35.35” H x 17.25”W x 24”D Weight: 128 lbs RS-2.2, When maximum reliability and SPL is required, the RS-2.2 is the choice. Used with the TOC™ R2 processor, the RS-2.2 contains the same components as the RS-1.2 (minus the passive network) and gets the greatest performance out of them. The TOC™ R2 processor contains: four pole linear phase dividing filters, precise equalization, Time Offset Correction (TOC™) and limiters. The RS-2.2 features are similar to the RS-1.2 with this difference: • Contains no passive dividing network since the system is intended to be biamplified. RS-2.2 Specifications: Frequency Response: 40 to 16kHz Power Rating: *1000 watts HF: 100 watts Nominal Impedance: 4 ohm HF: 8 ohms Sensitivity (1w/1m): 100 dB Maximum SPL: 129 dB @1meter (@ rated power) Nominal Coverage Angles: 60º H x 40º V, above 2 kHz Crossover Frequency: 1.2 kHz L.F. Drivers: CXL-2580C & HL-2580C H.F. Driver: DE 750/8 Input Connectors: 2 x NL4 Dimensions: 35.35” H x 17.25”W x 24”D Weight: 124 lbs Subwoofers The TOC™ subwoofers CB-2 or RS-2BB can be used to supplement and extend the low frequencies of these cabinet.

Price: 2499 USD

Location: Clearfield, Utah

End Time: 2024-11-04T23:30:50.000Z

Shipping Cost: N/A USD