Mini Folding Flip Up RMR Red Dot Sight Holographic Reflex Sight for Glock Pistol

Description: Description： Color: Bk / DE / RD / OR /GY Folding Red dot reflex lens (22mm X 16mm) Folds down flat when not in use. With a push of a button the FlipDot lens flips up and automatically turns on. Objective lens diameter: 22mm X 16mm Magnification: 1X Reticle: red dot Dot size: 3 MOA Length: 2.0 in Width: 1.2 in Height: 1.1 in Weight: 1.0 oz (without plate) Battery: 1*CR2032 battery(not included) MOUNTS: Fits on GLOCK MOS and slides that have been machined to accept RMR micro dot sights POWER ON: Flip up lens system deploys to the ON position with a push of a button POWER OFF: Turn off the optic by simply folding the lens down until it locks into place Package Include: 1 x Mini Flip Red Dot Sight 1 x Rubber Lens Cover 3 x Base Plate 1 x Small Screwdriver 3 x Allen Wrench 8 x Screw 1x Manual 1 x Lens Cloth Question:Can it fit on non mos and rmr glock slides? Answer:No,it can't. Unless you have plate groove already yes. Red Dot Flip Reflex Sight with 20mm (0.065") Picatinny rail mount and raised base. Sliding rails for GLOCK MOS and machined to accept RMR micro-point sights Mounted directly on the G. MOS pistol, it can be mounted on most RMR cut slides with the riser provided. You can easily mount the sight and adjust the height. Question:Will this fit on a Glock 30 gen4？ Answer:If your Glock 30 gen4 is the mos version, then it is suitable. Red Dot Flip Reflex Sight comes with 20mm (0.065inch) picatinny rail mount and a heightening base. Fits on GLOCK MOS and slides that have been machined to accept RMR micro dot sights Mounts directly onto G. MOS pistols and it will fit onto most RMR cut slides with the supplied riser. You can easy to install the sight and adjust the height. Description about Universal Mount: - Universal optics mount for most proliferated sites in the field - Super low-profile - Ability to use an optic without cutting your slide. - Sleek solid steel construction - The mount itself is secured to the slide via the dovetail with 6 set screws. Product Spec: Fits all Models Except 42/43 Length:1 7/8” Width: 1 1/8” Height: 1/8” Weight: 1.3 oz (with mounting hardware) Materials: aluminum Color: black Package Includes: 1 x GLOCK mount 1 x mounting hardware screws Notice: the pins for the RMR red dot only fit for the original RMR. But it can also install well on the replica RMR only with the screws .But the glock mount is not fit all Glock gun.If your gun has trapezoidal slot,this glock mount do not fit for your gun.You need one Universal Mount . Product installation: - Depending on what optic you have you will need to find the screws that correlates with your particular optic. There are two special screws for Triji-con RMR. Once you secured the GUM to your slide and found the correct post ( two sets of reinforcing post included) for your optic, go ahead and mount your optic on the post and use the final two longer securing screws to secure your optic to the GUM. - It is highly suggested that you have a gunsmith install the GUM and utilize the correct tools for installation. - Leupold Delta Point* can be mounted but not with reinforced posts to secure 100% UPDATE: We have confirmed compatibility with Vor-tex Ve-nom Red Dot sights

Price: 12.89 USD

Location: Hacienda Heights, California

End Time: 2024-08-14T01:53:42.000Z

Shipping Cost: 0 USD