MAXKOSKO Heat Tape for Water Pipes,Heating Cable for Pipe Freeze Protection 120V

Description: 1.PIPE FREEZE PROTECTION: Pipe Heating Cable ,5 W/ft, heats up rapidly.This heating cable can keep water flowing at ambient temperatures down to -40°F (-40°C). It consists of a 3 Ft power cord Plus a heating cable varies from 3 Ft to 9Ft long.2.HIGH TECH SELF-REGULATING HEATING TECHNOLOGY: The pipe heating cable smartly adjust its power output and never overheat or Burn. Water pipe heat tape can be installed with Straight-traced, Spiraled, or Overlapped.3.ENERGY SAVING: Easy heat heating cable has a built-in thermostat that automatically turns on at 38°F, heat trace cable heats only when necessary.4.EASY INSTALLATION: This water pipe heat cable is pre-assembled and ready to Install. You can easily DIY this heat tape for pipes by yourself by following the 5-steps instruction.(If you want to test before installation, please test at a temperature under 0°C (32°F)). 1.FIX THERMOSTTATPlace the thermostat on the coldest end of the pipe,en-suring the thermostat is in di-rectly contacted to the pipe.2.APPLY CABLEApply the heating cable to the pipe in a straight line,spiral or overlap on the pipe.3.FIX CABLESecure the cable to the pipe with high-quality electrical tape at 6"intervals.4.APPLY INSULATIONWrap the entire pipe and cable,incluing the thermostat,with fiberglass pipe wrap,foam pipe insulation,or other equivalents. TIPSTESTING THE CABLE BEFORE THE INSTALLATION: If you want to test, please test at low temperature. Uncoil the cable, and plug in the heating cable. Normally you can feel the slight warmth on the heating cable in a few

Price: 27.99 USD

Location: Hebron, Kentucky

End Time: 2024-01-25T02:51:10.000Z

Shipping Cost: N/A USD