LiTime 60A MPPT 12/24V/36V/48V Solar Charge Controller Bluetooth For LiFePO4 Gel

Description: 【99% Tracking Technology】LiTime 60A MPPT Solar Charge Controller with advanced Maximum Power Point Tracking technology can continuously track array’s maximum power point so as to get the maximum amount of power to charge the battery. The tracking efficiency is not less than 99% and peak conversion efficiency is up to 97%.(Max. Solar Panel Input Voltage is 150V) 【Bluetooth Function】 LiTime 12V/24V/36V/48V MPPT Controller equipped with a built-in Bluetooth module, customers do not need to purchase another Bluetooth module, which can achieve remote control and display usage information. 【LCD Screen & LED Indicators】LiTime MPPT controller comes equipped with an LCD screen to display the system operation information and 4 buttons to operate in the menus. Plus, multiple LED indicators will help to indicate the state of the solar panel array, battery, loads, controller. 【Excellent Heat Dissipation & Multiple Protections】LiTime MPPT controller is made of die-cast aluminum, which ensures excellent heat dissipation to reduce the power loss. In addition, the multiple protections built in the solar charge controller can ensure that the controller is completely protected from Reverse Connection, Overpower, Overvoltage, Short-circuit, Over-temperature. 【Applicable to LiFePO4, Lead-acid Battery】LiTime 12V/24V/36V/48V 60A MPPT Solar Charge Controller with LiFePO4 Battery Charging Mode, making it easy operation to charge LiFePO4. But it’s also compatible for Sealed, Gel Lead-acid batteries by adjusting the parameter. 【Additional Components】The copper wire connector equipped in the accessory can increase the contact area between the wire and MPPT during installation, increasing the ability to transmit current. Q: Will an MPPT overcharge a battery?A: LiTime solar charge controllers use maximum power point tracking (MPPT) technology which optimize solar production and control the battery charging voltage to prevent overcharging. Q: What does an MPPT controller do when the battery is full?A: When the battery voltage reaches a point where the battery charger decides that the battery is full, the charger will cut out, and stop drawing power from the MPPT controller. In other words, the battery charger will present a high impedance to the MPPT controller. Q: Can I connect a MPPT directly to inverter?A: Chill dude, you'd better not do this. MPPT solar charge controllers help to flow the current efficiently into your depleted battery. If we connect an MPPT solar charge controller directly to the inverter, your soalr system can get damaged, but if not damaged, there will be zero input in the inverter. So connecting MPPTs directly to the inverter is a bad idea! Q: How many amps do I need for MPPT?A: You take the total watts of the solar array divided by the voltage of the battery bank. That will give you the output current of the soalr charge controller. For example, a 1000W solar array ÷ 24V battery bank = 41.6A. The rating of the charge controller should be at least 40A. On Aug 4, 2024 at 21:01:30 PDT, seller added the following information:

Price: 209.99 USD

Location: La Puente, California

End Time: 2024-11-23T03:05:35.000Z

Shipping Cost: 0 USD