Golf ball marking template for Rapsodo RPT MLM2PRO launch monitor

Description: Golf ball marking template for Rapsodo RPT MLM2PRO. This item is a template that can be used to create replicas of Rapsodo RPT golf balls. It is the best way to create your own RPT like golf balls that work on the MLM2PRO launch monitor. Sticker dots or decals will tend to flake off and might only last a few shots. If you mark the dots with the recommended marker, you will have good adhesion and many shots without problems. You can then mark as many golf balls as you want. A video of the marking method can be seen here on YouTube: https://www.youtube.com/watch?v=8kzxLyDRH-4 The Callaway RPT balls are sold for $69 per dozen, so this template not only allows you to mark any type of ball, but it does it at a fraction of the cost. You can even take your old shag balls, mark them, and hit them away at the outdoor range. Important… Please read all of the notes below. This eBay item only includes: - One golf ball marking template Other items needed but not included with this item: - Golf balls - A paint marker. I've found that the most durable marker is the All-Weather Plastic Ear Tag Marker that can be purchased here: https://amzn.to/483RRBE (Caution: The Ear Tag Marker is highly toxic and must only be used in well ventilated areas to avoid exposure. Do not use around children or animals.) The Markal ultra fine Pro-Line Black Marker also works, but it is not as durable. The Super Met-al Paint Marker also works, but it is not nearly as durable (...although the metal tip does create the roundest dots). - Note: Black sharpie type permanent markers are not reflective enough to be picked up by the camera and will not produce reliable results. I'm told that black sharpie oil paint markers do work similar to the Met-al Paint marker. - White fast drying nail polish or a White Met-al Paint Marker - this can be used to cover over markings you don't want visible, but I'm told that others have omitted this step with no adverse results. The template is easy to use… 1. Position the ball in the template. line up the 2 arrows 2. Use the paint marker to create dots using the template as a guide. 3. Allow to dry and remove from template. 4. Use white nail polish or a white paint marker to cover all other golf ball logo markings - optional. Some other notes: - Some users have contacted me with questions about durability and I’ve tested with several different markers. The “tag marker” shown is by far the best marker for durability. I performed a test on the ball shown in the pictures and after 120 full 7 iron shots into a net there is minimal wear to the paint markings. The monitor still reads spin the same as the first shot. - In contrast, I’ve heard that the sticker or dot decal method is inferior due to difficulty transferring the dots and the decals flaking off on normal impact. You wouldn’t want to have to align the ball on every shot to try to avoid impacting the dots. Furthermore, out product allows marking an unlimited number of balls instead of just a few. - Performance results depend on many factors including lighting, camera position, ball type, logos, shot type, and launch angle. Lighting is important and the paint marker will produce good contrast and reliable results. As the paint wears away, you can always touch up markings. - If you are hitting the golf balls into an indoor screen, paint and or nail polish markings may stain or permanently mark the screen material. For that reason, the marked balls should not be used on projector screens or similar surfaces. - clear Polyurethane Spray is not necessary. Not sure if that will protect the balls from marking projector screens. - Wedge shots tend to remove paint marks more aggressively than lower lofted clubs.

Price: 23.99 USD

Location: Charlotte, North Carolina

End Time: 2024-09-13T22:42:45.000Z

Shipping Cost: N/A USD