for Dewalt Cordless Drill Power Tool Accessories OEM N076006 Motor and Pinion 7T

Description: 7 teeth Motor CCW15 Parts N076006 N021162 for DeWALT 10.8V DCF815S2 DCF813 DCF815 DCF805 DCF813S2 Cordless Drill Feature: This is an O.E.M. authorized part OEM Part Number : N076006 Fits various DECKER models This is a DEWALT replacement part Weight: 256g Products Compatibility: This item works with the following types of products: • For DeWalt 18 gal compressor • For DeWalt Impact Driver • For DeWalt Compressors • For DeWalt Cutoff Tools • For DeWalt Impact Drivers, Wrenches • For DeWalt Planers • For DeWalt Generators • For DeWalt Trimmers and Cutout tools • For DeWalt Drills and Hammerdrills • For DeWalt Chop saw • etc............... Matching Models For This Part: DCF813S2 Type 1 12V IMPACT WRENCH DCF815S2 Type 1 12V IMPACT DRIVER DCF815 Type 1 and Type 2 DCF805 DCF813S2 Description: This is a genuine motor and pinion from DeWALT. The metal motor and pinion is compatible with some impact drivers. This item has been designed to power the driver devices, and is secured to the mechanism assembly. A screwdriver may be required when replacing this part. Note: 1、The same number of part can be used for different machines. 2、compare the dimensions replace part with the displayed，Please Professional advice: Tool type: Impact Driver 1- Motor was burnt out ? 1 Removed all the screws. 2 Disconnected the 2 wires from the motor. 3 Cleaned up all parts. 4 Installed the new motor. 5 Installed all screws. 6 Test, all set 2-The motor wore down Swapped motor and replaced connecting wire by soldier into place. 3- No torque Remove the plastic housing, removed the motor, un-soldered the old motor and soldered in the new one. Reassembled 4- I mproperly working motor 1. Remove 9 torq screws 2. Remove shell carefully 3. Lift motor out from bottom shell and remove wires. 4. Replace with new motor,connect wires. 5. Replace top shell and screws. 6. Job well done 5- Burnt motor Remove the screws from the housing. Then take a few picture of how all the parts where installed. I also made a diagram of the wiring. Remove the wires from the motor. And removed motor. Make note on how the motor is placed in the housing the are some nubs on the motor that have to fit into the housing to make it fit correctly. Install new motor, install the wires. Make sure all the internal parts are where they should be. Then assemble the housing back together. 6- Dead dc motor Remove the screws from the cordless drill, split the case open, carefully lift the old dc motor from the housing, pay close attention of the layout. Remove the positive (red) and negative (black) leads from the old dc motor. Place the positive (red) lead to the positive lead on the motor, there is a red indicator on the motor, then place the negative (black) to the negative lead on the motor. Push the motor into the gear assembly housing making sure the gears align. Place the dc motor on the case and screw the case together. 7- Motor had a dead spot and would only start half the time. I could get it to start by spinning the motor. Remove battery from tool, remove the nine screws holding the two halves of the tool together, split the tool(you will need to cut the label on top of the tool), remove the motor, remove the wires from the motor, connect the wires(noting positive and negative)to the new motor, install new motor in tool, put tool back together. make sure the motor is fitted correctly in the tool before you tighten the screws. 8- Had power but wouldn't work/bound up Removed the 9 fasteners (t10). Pulled all the guts out and removed the motor from the front chuck piece (with the gears and all). Took just the motor to my vice and grabbed it with a pair of channel locks to make sure the motor was bound up.(it was) ordered the new part replaced it and did the 2 electrical connections. Managed to get the plastic housing lined up. (hardest part.) then replaced the 9 fasteners and it was good to go. However took it back apart because the gears in the front piece shifted slightly causing a lot of wobble and kick. Lined them up properly. (they really only go one way) replaces the fasteners yet again and was ready to roll. About tracking number update: If your tracking number is no logistics information, as thousands of parcels sent to foreign countries, logistics companies did not update logistics information, please contact us the first time, Please kindly do not directly open the dispute. We are the first time for you to solve! Time of shipment: All of product we can shipping out within 3~5 weekday, on usually we are according to customer orders time for packing and shipment, we need to carefully check the quality of the goods before to Ship, So take some time to handled. Time of delivery: Due to force majeure factors: hurricanes, rainstorms affect flights. Leading to logistics delays. We are honest sellers, will not let you suffer any loss. Please give the logistics company a little processing time, we wait for the package to reach your side. If your logistics information arrives at the local post office: If the local post office does hasn't contact you, please contact your local post office as soon as possible to get your package. Otherwise, overtime receipt of parcels, the local post office will return your parcel, the consequences of self-responsibility. Protection time is running out: When we have finished time of shipment, if the product protection period running out, please extend the product protection period by yourself or contact us, Please kindly don't open the dispute directly. Import duties: Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Import duties, taxes and charges are not included in the item price or Shipping charges. These charges are the buyer's responsibility When you receive the goods, if there are any problem, please contact us and do not directly open the dispute. We promise we will give you a satisfied solution after we confirmed it. We also will give you a positive evaluation. Order amount 100 US dollars more than at same times , we can free shipping DHL,EMS, UPS, will become our VIP customers, enjoy additional benefits for all the life. Q: How can track my parcel? A: You can track your parcel in the Purchase history using your tracking number. Q: As a retail or wholesale to offer wholesale price if i lots of items? A: if you need to buy plenty of items at the same times, please contact me first. i will offer you the competitive wholesale price . Q: How Can i pay my order? A: Ebay supports Visa, MasterCard, Maestre Debit Card, Paypal If items damaged,we must be contacted within 24 hours of receipt. If the item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. If you are not satisfied when you receive the item (incorrect, damaged, defective, or item not as described), please return it within 7 days for a replacement or money back. For any personal reasons (choose a dislike or i needn't this product anymore),Return shipping charger will be the buyer's responsibility. We will not accept any items with odors(perfume.smoke,ect.) All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your order ID.

Price: 27.62 USD

Location: Shenzhen

End Time: 2024-02-17T11:07:23.000Z

Shipping Cost: 0 USD