Description: We are finally making our C-19C set available for the first time! This set was developed to take your Elite Force G-19 and turn it into our rendition of the KAP-40 from Call Of Duty: Black Ops 2! We aimed to create something that was the average and make it into something that would turn a few heads, and turn heads it will! Who wouldn’t want to run around playing their favorite sport with a little piece of the gaming golden era by their side, or collecting a piece of it just to have a wall mounted replica? This set is of course made for the VFC g-19, but will require standard sized mags or even long mags to fit to fit the sizing of the original design. That being said, this will work with the Elite Force, VFC, and Spartan Imports Version of the G-19 as long as it’s the VFC type. The assembly is fairly straightforward once you have the frame assembled. For help with the frame you could watch our “How To: Build The DPI CM-9 Series Of Realistic Replicas” on YouTube, or the various other videos on the subject, but will be glad to offer extra help if needed! Instructions: You take your lower rail and it’ll slot onto your lower frame in front of your trigger guard, and line up the screw holes. Then you take your upper and slot it into place over your frame and line up all the screw holes. Once that is done you’ll take your long 2.5mm screw and nut and use it on the front most screw hole connecting the upper and lower, then the shorter one will connect through the rearmost screw hole and the nut will sit just above the slide. Take your time and don’t apply too much torque so the nut doesn’t contact the slide. Then you’ll take your side rails and bolt them on, making sure the holes remain lined up. Don’t over-tighten the screws. Check function of the slide to make sure the screws aren’t too tight. Apply blue thread lock if so desired. Purchase of the DPI C-19C set entitles you to the set of 6 pieces of the set, the railed top section, the 2 side rails, the bottom section, the lower rail, and the charging handle, and accompanying hardware. The G-19 airsoft gbb pistol parts are not included and the set will come completely unpainted in black plastic. The picture of the completed and painted sets, are for example only. This is a 3-D printed set, printed using professional polylactic acid. This should not be exposed to extreme temperatures or direct sunlight for any extended period of time. Much like any polymer, it can be warped or lose structural integrity when exposed to high temperatures, and or harsh direct sunlight. There maybe some spots or blemishes on the parts as we do our best to make sure every part will fit as intended and make sure they function at 100% before sending them out. These are pieces for an airsoft replica and can in no way be modified or otherwise be used with or for live ammunition.
Price: 150 USD
Location: Casa Grande, Arizona
End Time: 2024-12-25T20:59:06.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: DPI
Type: Mount
Model: C-19C
Country/Region of Manufacture: United States
