Description: This turnout control is mentioned in the February 2023 Model Railroader under Ask MR (questions & answers). Talk about Realism! Now you can have under the table positive manual control of your turnouts from as many as several feet away with correct frog polarity, and three bi-color LEDs (two green/red and one green/yellow) corresponding with the direction of your turnout on your layout with this simple KIT. This is all accomplished with a simple pull or push to a double pole double throw (DPDT) polarity reversing slide switch mounted under the table. For as little as $9.19 each! This KIT includes: 1. Detailed step by step instructions for wiring, mounting, and controlling the DPDT switches, your turnouts and frogs with detailed drawings for each. If you can solder, you can do this! 2. FIVE - DPDT slide switches pre-drilled with two 1/16 in. holes. One for the wire that throws the turnout, and one for the long piece of wire to push and pull the DPDT switch through the fascia. 3. Over 66 ft. of 22 gauge wire in 3 different colors for wiring the DPDT switches, your turnout frogs and the LEDs. 4. 15 resistors of the correct resistance for your setup (12 to 16 volts). 5. 15 bi-color common cathode 3mm LEDs - 10 red/green & 5 yellow/green. 6. TEN inches of 1/16 inch thick music wire in 2 inch lengths for throwing your turnouts through the table. 7. 15 signal targets with 3mm opening. These are also available separately if you want more.. See our listing! The KIT does NOT come with glue for mounting the switch under the table. I highly recommend E 6000 Industrial Strength Adhesive or Barge All Purpose Cement available just about anywhere. It does NOT come with a long piece of wire (I use the 1/16th inch thick music wire readily available through Do It Best, Walmart, Hobby Lobby, Hobby Express and Amazon for about $3 for several 3 ft. pieces) to push and pull the DPDT switch to throw your turnout from a remote position through the fascia. It, of course, does NOT come with any of the track, turnouts or model buildings shown. Please note, this is a KIT! Which means it will require some assembly on your part, which many find enjoyable and educational, and it will be worth it! Since this is electronic equipment no returns are accepted which is standard for the industry for electric switches and other electronics. Feedback from customers:Package arrived today love it, love it, love it, thank you so much will be ordering more soon! Joey Really well packed and instructions very well thought out! Makes everything look so realistic! Your electronics work nicely. It has been almost as fun to set things up as running the trains! QUESTIONS: Is the bracket that holds the slide switch in place included? Hi, there is no bracket . It's held in place by industrial strength glue. I have over a dozen in place for about a year and a half. It works just fine. Regards, Greg 1) Will these work on a DC layout as well as a DCC? 2) Do you combine shipping? I am thinking of buying 10 to start; Ultimately I may want as many as 30. Hi, and thanks for your inquiry! Yes! They work just fine in DC as well as AC Any help you might need or questions you might have about voltage, resistance, wiring in parallel or series, etc. we will be happy to answer! We accept Paypal, which also gives you the option of "Paypal Credit", or using your debit and/or credit cards! Have you seen our "Constant Brightness Super Bright Locomotive Headlight kit" , or our "3 volt 3mm lights with 5 in. leads"? They're great for lighting up your dark passenger cars. Both available ! This item is posted and managed courtesy of Bonanza
Price: 45.95 USD
Location: Pittsburg, Texas
End Time: 2024-09-10T16:10:21.000Z
Shipping Cost: 2.1 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
