19PCS Paintless Car Body Dent Puller Repair Tool Dint Hail Damage Remover Kit

Description: Product Specifications： Material: stainless steel + plastic Size: 18*13.5CM Product Features： Aluminum body Stainless Steel Adjustment knob Stainless Steel Nuts/Bolts/Pivot pin/E-Retaining clips One screw on the top of the dent lifter is used to adjust the middle height of the dent lifter. With sandblasting oxidation process, smooth texture feel and outstanding looks, The product is very strong and durable. On the bottom of the dent lifter is silicone, not ordinary rubber,which is very soft and not harmful for oil paint and can be teared down. Product Description: Easy To Control - DIY can removal the dent by yourself , Suitable for any person to operate, It has the advantages of simple operation, repair the dent for you directly. Padded feet add support for maximum pulling power Hand unit allows for controlled leverage while removing dents On the bottom of the dent lifter is silicone, not ordinary rubber,which is very soft and not harmful for oil paint and can be teared down. Package Include： 1 * Dent Lifter (No adhesive pads) 18 * Car Dent Repair Tabs Print Tabs With different style Instructions: 1. Find the concave part and clean it with cleaning cloth and alcohol, 2. Check the shape and size of the depression with the detection board, and mark it with a marker. 3. Select the corresponding glue stick and clean it with alcohol, then insert the glue gun to charge and heat it. 4. Wait for 2-3 minutes, after the glue stick completely melts, apply evenly on the corresponding suction cup, and apply more appropriately. 5. Attach the suction cup to the concave part, wait for 3-5 minutes, when the glue has a little bit of residual temperature (just a little bit of residual temperature), buckle on the suction and extraction repairer, press the handle with hand, gradually increase the force, and press several times until the observation surface is flat or slightly convex, do not operate too quickly 6. Spray alcohol on the glue and remove residual glue with glue shovel. 7. There are some small depressions, the periphery is relatively high, and the middle is relatively deep. Please use the leveling hammer to knock the leg edge, so that these depressions will be relatively smooth, and it is easier to deal with those depressions. 8. Check the repair effect of the depression again. If it is not repaired, please repeat the above steps until it is repaired

Price: 9.99 USD

Location: Hebron, Kentucky

End Time: 2025-02-09T09:30:16.000Z

Shipping Cost: 0 USD